V.C.C Shuttering House

Slotted Angle/Acro Shuttering Plates are highly recommended for heavy RCC Walls and Columns. The Ongoing highway and Bridge projects have further increased the demand for this formwork System. We are Chandigarh Based Manufacturers and Supplier on Hire basis of These Acro Shuttering Plates. Our clients are spread over all over Punjab, Haryana, Himachal Pradesh, Uttrakhand(Uk), Utter Pradesh (Up), Delhi, Gujrat, Ahmedabad, and Madhya Pradesh and All other Parts of India. We Also Export these Acro Shuttering Plates to Other Parts of World.

• Slotted Angle Plates
• Wall Form Shuttering Wall
• Form Panels
• Bridge Plates
• and Bridge formwork

These Shuttering plates/ formwork are applicable in construction Activities Like :

• bridges and heavy vertical casting for various kinds of construction projects.
• Colvert flyover bridges.
• under bridges and all other types of heavy and major work.

Due to their design and use of the heavy material in making makes them fit for all kinds of heavy load-bearing and complicated construction of buildings.

Slotted angle shuttering plates from VCC Shuttering House

Acro Shuttering Plates are made in different Combinations of following Raw material :

• 3 mm HR Sheet
• the slotted angle of 45mmx45mmx4 mm
• or 50mmx50mmx5mm  size as per the requirement of our clients.

Various slots are made at the difference of 50mm center to center for providing adjustment for Soldiers. These Soldiers are fitted next to the Shuttering plates. They have parallel slots having on it. After fitting of these plates with soldiers it becomes a very strong formwork system ready to bear the heavy load of the cast material.

Sizes of Acro Shuttering Plates :

Acro Slotted Shuttering Plates are made in various sizes like

• 1250 mm x 900 mm,
• 1250 mm x 600 mm,
• 1250 mm x 500 mm,
• 1250 mm x 400 mm

according to various uses and needs of customers. Further, these plates are made in various designs to manage weight and maintain the strength of these Acro Plates.

Soldiers for Acro Shuttering Plates :

These Acro Shuttering Plates are fixed to Soldiers with the help of tie rods and C-Clamps. This system of formwork is specially designed to provide strength and increase the scope of Shuttering System. This purpose is achieved through various kindly of accessories for the Formwork.

Shuttering Plates are attached with these soldiers. They are also known as wall form panels. Soldiers are made in various sizes like:

• 2500 mm X 150 mm.
• 2500 mm X 100 mm.
• Also, corner soldiers are available in the size of 2500mm X 100 mm X 100 mm. in L shape for further increasing the scope of its usage.

Quality Of Raw Material Used:

For the longer working life, these Shuttering plates are made of the very robust quality of material procured from our trusted vendors. The use of high-quality HR Sheet and Angle for making these plates ensures high strength to bear the heavy load of wet concrete during the casting process.

R&D done for these Shuttering Plates :

Our R&D department is working all the time to bring in new designs.  Through a various combination of Sheet and angle in various ways are used to design a shuttering plate which is sturdy, reliable, and long-lasting. We try to provide the best quality of material to our valued clients.

• HR Coil Sheet of 2.9 mm, 3.00 mm and 3.15 mm.
• Flat or angle of very high quality used.
• Heavy mig Welding to ensure its long llive.

• Shuttering Plates are also known as Steel Plates, M.S Plates, Centering Plates, Formwork and Farma. We are a manufacturer, exporters, and suppliers of Steel Shuttering Plates on hire basis. These plates are manufactured in.

  Various Sizes of Shuttering Plates
  Size of Plates	4’x2	4’x21	,4’x18”	4’x15′	4’x12”	4’x9”	4’x6”	3’x2′
  weight(Kgs)	27	24	21.50	18	15	12	9	21

  Various kinds of Customization is done on these Steel Shuttering Plates in order to make them suitable for the specific requirements of our Clients .

  We Supply these Shuttering Plates to our various clients spread over Punjab, Haryana, Himachal Pradesh, Jammu & Kashmir, Gujrat, Utter Pradesh (Up), Uttara Khand (Uk), Madhya Pradesh and all other parts of India.

  Uses of Shuttering Plates:

  Shuttering plates are a main supporting item for the wet concrete poured in during the casting process. It acts as a temporary base or vessel in which concrete is put into. It is kept like that for a few days for hardening. When the concrete is able to beat its load, these steel shuttering plates are removed then carefully without causing any damage to the slab.

  Material Used for Manufacturing Steel Shuttering Plate:

  A very high-quality material is procured after carefully evaluating various types of raw material available in the market . various factors are considered and then the best of them is selected for making these metal shuttering plates. Quality of Raw material form basis for the quality of final product therefore carefully a sturdy and durable material is selected from our trusted vendors spread all over Punjab, Haryana, Himachal Pradesh, Gujrat, and Delhi. Very high quality of Hot Rolled M.S Sheet and Angle are used to make a dimensionally accurate Steel Shuttering Plate.

  Technology Used for Manufacturing These Shuttering Plates:

  We use advanced technology and machines for making these Steel Plates . These machines are further upgraded from time to time as per need and ongoing trends in Industry. Separate machines are purchased and used for all the different operations to assure dimensional accuracy and enhance the quality of the product. Our experienced supervisors and workers work with full dedication to achieving the goal of supplying a top quality product to our valued purchasers

   

Additional Information:

• Production Capacity: 5000 unit/month
• Delivery Time: 4-5 Days